All Burgener Research nebulizers features the patented Parallel Path design. Parallel Path nebulizers employ a large opening (ID) for the sample path to prevent physical obstruction by tiny particulates. The sample path actually increases in size near the gas stream, making plugging virtually impossible.

Burgener's new Enhanced Parallel Path Method significantly improves sample delivery to the torch, enables lower flow rates, and produces a more stable mist than previously possible. Burgener nebulizers are fabricated from Teflon (PTFE, FEP & PFA), so they are practically inert to laboratory chemicals, acids and solvents. Teflon's non-wetting properties also mitigates the common problem of salts forming around the gas stream.

NOTE: Although rare (less than 1% of users have reported this occurrence), there can be some salting from samples with very high sodium (Na) concentrations. This results from a reaction between sodium ions in the sample and the fluorine in the Teflon, but in general, such salting occurs more slowly with Teflon than with other materials. Salts can usually be washed off with a dilute HF acid wash.

 

Teflon Mira Mist

Salting is very rare, but can occur over long periods of time, especially with high Sodium levels in the solution. Such salting can be cleared easily with a dip in 5 - 10% HF, (Caution: Be careful when handling HF. It soaks into the skin before you feel it burning, and in low concentrations it looks like water.)

• Enhanced Parallel Path Design
• Operates on 0.2 ml/min to 2.5 ml/min
• Excellent mist
• Can handle high levels of particulates in sample
• Fits regular chambers as a direct replacement for glass concentric nebulizers
• Operates on standard pressures of 35 - 45 psi
• Can be used for any liquid

 

Part Number	Description
TMM 3500	Burgener Research Teflon Mira Mist Nebulizer

 

Recommended for most instruments, most samples, concentrated acids, organic solvents. Excellent stability, % RSD, intensities.

 

=======================================================================

PEEK Mira Mist

Same as the Teflon Mira Mist, but easier to make, so you save a little. Works for most samples, but not concentrated acids or certain organic solvents.

• Enhanced Parallel Path Design
• Operates on 0.2 ml/min to 2.5 ml/min
• Excellent mist
• Can handle high levels of particulates in sample
• Fits regular chambers as a direct replacement for glass concentric nebulizers
• Operates on standard pressures of 35 - 45 psi
• Can be used for any liquid

 

Part Number	Description
PMM 4000	Burgener Research PEEK Mira Mist Nebulizer

 

Recommended for most instruments, most samples. Lower cost. Excellent stability, %RSD, intensities.

 

=======================================================================

T2100

The T2100 was designed as replacement for T2002 and Trace. The T2100 is essentially unpluggable, and can be used for any liquid. Salting is very rare, but can occur over long periods of time, especially with high Sodium levels in the solution. Such salting can be cleared easily with a dip in 5 - 10% HF, (Caution: Be careful when handling HF. It soaks into the skin before you feel it burning, and in low concentrations it looks and feels like water.)

• Enhanced Parallel Path Design
• Huge Sample Capillary: 750 microns / 1/32 inch
• Operates on 0.5 ml/min to 3.0ml/min
• Excellent mist - not quite as good as Mira Mist, but better than most concentrics
• Can handle high levels of particulates in sample
• Fits regular chambers as a direct replacement for glass concentric nebulizers
• Operates on standard pressures of 35 - 45 psi
• Can be used for any liquid

 

Part Number	Description
T2100	Burgener Research T2100 Nebulizer

 

Recommended for most Instruments, most samples, with concentrated acids, or organic solvents and high levels of undissolved particles, very good stability, %RSD, intensities. Similar to Teflon Mira Mist, but with larger ID sample capillary. Better than T2002 or Trace, but not quite as good as Teflon Mira Mist.

 

=======================================================================

Ari Mist

Very low sample flow. Good for ICP and ICP/MS.

• Enhanced Parallel Path Design
• Operates on 0.050 ml/min to 1.0ml/min
• Black PEEK body, Teflon sample and gas capillaries
• Only for samples that are particulate free
• Fits regular chambers as a direct replacement for glass concentric nebulizers
• Operates on standard pressures of 40 - 50 psi

 

Part Number	Description
AM 5000	Burgener Research Ari Mist Nebulizer

 

Recommended for low flow applications for ICP-MS instruments. Handles particulate-free samples, but not some organic solvents, HF, or Sulphuric acid. Excellent stability, %RSD, intensities.

 

=======================================================================

Ari Mist HP

Ultra low sample flow, special application high pressure nebulizer only used when low flow or very high stability and intensities are required.

• Enhanced Parallel Path Design
• Suitable for LC-ICP-MS Analysis
• Can operate on 0.005 ml/min to 1.0 ml/min
• Ultra low uptake (5 µl/min)
• Excellent mist
• Only for samples that are particulate free
• Fits regular chambers as a direct replacement for glass concentric nebulizers
• Operates on higher pressure (80 psi)
• Can be used for any liquid

 

Part Number	Description
AM HP 5500	Burgener Research Ari Mist HP Nebulizer

 

Designed for LC-ICP-MS interface, the Ari Mist HP is engineered to be compatible with typical HPLC flow rates for LC-ICP-MS determinations. When run at 10 - 15 µl/min it provides similar results to direct injection nebulizers, without the difficulties of direct injection.

 

=======================================================================

Enya Mist

Ultra low sample flow. The lowest flow Burgener nebulizer. Designed for LC-ICP-MS interface, tiny samples, and for Split flow applications. The simple addition of a 'T' connection allows for 500ul/min to be pumped to nebulizer, and only 10-20ul/min delivered to nebulizer.

• Enhanced Parallel Path Design
• Operates on 200 nanoliters/min to 50ul/min
• Can NOT handle high level of particulates in sample
• Fits regular chambers as a direct replacement for glass concentric nebulizers
• Operates on standard pressures of 50 psi

 

Part Number	Description
EM 6000	Burgener Research Enya Mist Nebulizer

 

Produces very low oxides in ICP-MS. Works better with Scott style spray chambers than cyclonics (sample droplets are lost on the wall beside the injection point).

 

=======================================================================

Mira Mist CE

Special application low flow nebulizer designed for CE-ICP-MS for use when low flow or very high stability and intensities are required.

• Enhanced Parallel Path Design
• Designed for CE-ICP-MS Analysis
• Can operate on 0.01 ml/min to 2.5 ml/min
• Very low uptake (10µl/min)
• Can operate down to .001 ml/min with alcohol solutions
• Excellent mist
• Can handle high levels of particulates in sample
• Fits regular chambers as a direct replacement for glass concentric nebulizers
• Operates on higher pressure (80 - 90 psi)
• Can be used for any liquid

 

Part Number	Description
MM CE	Burgener Research Mira Mist CE Nebulizer

 

Designed for CE-ICP-MS interface, the Mira Mist CE allows the CE capillary to extend to the tip of nebulizer for zero suction, zero back pressure CE interfacing with ICP-MS. Works best with mini chamber.

 

=======================================================================

T2002

Identical in most respects to the original Burgener Trace, the T2002 also features an inner sample passage larger than the capillary used to carry the sample from pump to nebulizer, so it is theoretically unpluggable and has routine tolerance to high salts and high solids. The T2002 will be discontinued as of January 2010, but nebulizers will be available until that time or beyond, until the inventory runs out.

• Enhanced Parallel Path Design
• Huge Sample Capillary: 425 to 800 microns
• Operates on 0.8 ml/min to 2.5ml/min
• Can handle high levels of particulates in sample
• Fits regular chambers as a direct replacement for glass concentric nebulizers
• Operates on standard pressures of 35 - 45 psi
• Can be used for any liquid

 

Part Number	Description
T2002	Burgener Research T2002 Nebulizer

 

Recommended for most Instruments, most samples, with concentrated acids, or organic solvents and high levels of undissolved particles, very good stability, %RSD, intensities.

 

=======================================================================

Mira Mist and Ari Mist Gas and Sample Line Fittings

Mira Mist and Ari Mist nebulizers use 2 mm gas lines and UpChurch finger tight fittings for the sample lines. Although this allows for simple attachment of GC, LC, CE systems, it is not standard for nebulizers. To ensure simple attachment to your instrument, we have an extensive array of fittings available. Gas line fittings are also usually included with the nebulizer. Please let us know the make and model of your instrument, and we will include the necessary fittings at no charge.

Part Number	Instrument
BRG 200	Agilent 7500 Series/HP 4500
BRG 204	Agilent 7700 Series
BRG 306	Finnigan/Thermo
BRG 204	HORIBA/Jobin Yvon
BRG 306	GBC Scientific
BRG 306	Leeman Labs
BRG 206	Perkin-Elmer ELAN DRC/9000/6X00
BRG 308	Perkin-Elmer Optima 2X00/4X00/5X00/7X00
BRG 206	Perkin-Elmer Optima 3X00
BRG 309	Spectro
BRG 204	Thermo iCAP 6X00 Series/X-Series ICP-MS
BRG 305	Thermo Jarrell Ash (TJA)
BRG 307	Thermo VG Elemental (pre 2002)
BRG 306	Varian

 

18 Item(s)

Show 5 10 15 20 25 All per page

View as: List  Grid

Sort by Position Name AW Part Number Price OEM Part Number Part Classification Instrument Type OEM OEM Description

18 Item(s)

Show 5 10 15 20 25 All per page

View as: List  Grid

Sort by Position Name AW Part Number Price OEM Part Number Part Classification Instrument Type OEM OEM Description