Category Navigation:

You're currently on:

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

 

Burgener Nebulizers

Burgener Research Nebulizers and Accessories

Burgener Research

 

All Burgener Nebulizers are made with the patented Enhanced Parallel Path Method. 
US Patent # 6,634,572; Canadian Patent # 2,384,201

Nebulizers
     
Burgener Research Nebulizers for ICP and ICP-MS
Teflon Mira Mist Nebulizer
AW Part # Description

TMM3500

Operates on 0.2 ml/min to 2.5 ml/min. Excellent mist, and can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Operates on standard pressures of 35 - 45 psi. The Teflon Mira Mist can be used for any liquid. Salting is very rare, but can occur over long periods of time, especially with high Sodium levels in the solution. Such salting can be cleared easily with a dip in 5 - 10% HF.

CAUTION: Be careful when handling HF. It soaks into the skin before you feel it burning, and in low concentrations it looks like water.

Cross-Reference(s):

G3161-80001 (Agilent ICP-MS)
CP913246 (Agilent ICP-OES)
N0777031 (PerkinElmer)
4600356 (ThermoFisher)

     
PEEK Mira Mist Nebulizer
PEEK Mira Mist Nebulizer
AW Part # Description

PMM4000

Same as the Teflon Mira Mist, but easier to make than the Teflon Mira Mist, so you save a little. Works for most samples, but not concentrated acids, and not some organic solvents. Still has Teflon capillaries for the samples and for the gas. Standard pressure (45 psi), low sample flow, enhanced parallel path design. Can operate on 0.2 ml/min to 2.5 ml/min.

Excellent mist, and can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers.

Cross-Reference(s):

G3161-80000 (Agilent ICP-MS)
CP914506 (Agilent ICP-OES)
N0775330 (PerkinElmer)
842312051471 (ThermoFisher iCAP)
4600356 (ThermoFisher ICP-MS)
47.929.024 (HORIBA JY)

     
T 2100 Nebulizer
T 2100 Nebulizer
AW Part # Description

T2100

Huge Sample Capillary: 750 microns / 1/32 inch. Designed as replacement for T2002 and BTN. Essentially unpluggable with un-dissolved particles. Can operate on 0.5 ml/min to 3.0 ml/min. Excellent mist, but not quite as good as Mira Mist, but better than most concentrics. Can handle very high level of particles in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Operates on standard pressures of 30 - 45 psi.

The T 2100 can be used for any liquid. Salting is very rare, but can occur over long periods of time, especially with high Sodium levels in the solution. Such salting can be cleared easily with a dip in 5 - 10% HF.

CAUTION:  Be careful when handling HF. It soaks into the skin before you feel it burning, and in low concentrations it looks and feels like water.

Cross-Reference(s):

N0777033 (PerkinElmer)
136388-00 (ThermoFisher)

     
PFA 250 Nebulizer
PFA 250 Nebulizer
AW Part # Description

PFA250

Low Flow design for ICP-MS. PFA nose and inner capillaries and all wetted parts. Peek body for strength and longevity. Sample Capillary: 250 microns. Designed for ICP-MS where low flow is desired and PFA only touching the liquids is desired. Operates from 50 ul/min to 1 ml/min.

Excellent mist, seems to be more stable, and have lower %RSD than a Mira Mist. It is set to run at a bit higher pressure than a Mira Mist, but well within most instruments standard ranges. Uses about 40 psi for .65 L/min.

This nebulizer’s sample flow rates are much lower than normal for ICP OES.  The PFA 250 can be used for any liquid.

Cross-Reference(s):

None

     
Ari Mist Nebulizer
Ari Mist Nebulizer
AW Part # Description

AM 5000

Very low sample flow, enhanced parallel path design. Standard pressure (40 - 50 psi). Black PEEK body, Teflon sample and gas capillaries. Can operate on 0.050 ml/min to 1.0 ml/min.

Good for ICP and ICP/MS. Only for samples that are particulate free. Fits regular chambers as a direct replacement for glass concentric nebulizers.

Cross-Reference(s):

N0777032 (PerkinElmer)
4600495 (ThermoFisher)

     
NX-175 Nebulizer
X-175 and NX-175 Nebulizer
AW Part # Description

X-175

NX-175

Low Flow design for ICP/MS. Peek inner capillaries, PTFE nose, Peek Body for strength and longevity. Sample Capillary: 175 microns. Operates from 50 ul/min to 1 ml/min. Excellent mist, is more stable and has lower %RSD than an Ari Mist. The X-175 is set to run at a bit higher pressure than a Mira Mist, but well within most instruments standard ranges. Uses about 40 psi for .65 L/min

The NX – 175 is set to run higher flows as required for the PerkinElmer NexION and Analytik Jena/Bruker/Varian ICP-MS with 1.2 L/min at 50 psi.

This nebulizer’s sample flow rates are much lower than normal for ICP OES.

Cross-Reference(s):

None

   
Ari Mist HP Nebulizer
Ari Mist HP Nebulizer
AW Part # Description

AM HP 5500

Very low sample flow, enhanced parallel path design. Higher Pressure (80 psi). Brown PEEK body, Teflon sample and gas capillaries. Can operate on 0.005 ml/min to 1.0 ml/min. Good for LC/ICP/MS

Only for samples that are particulate free. Fits regular chambers as a direct replacement for glass concentric nebulizers. When run at less than 10 ul/min it provides similar results to direct injection nebulizers, without the difficulties of direct injection.

Cross-Reference(s):

None

   
ENYA Mist Nebulizer
ENYA Mist Nebulizer
AW Part # Description

EM 6000

Ultra low sample flow, enhanced parallel path design. Standard Pressure (50 psi). Our lowest flow ICP/MS nebulizer. Runs from 200 nanoliters/minute to 50 ul/min. Designed for ICP/MS - HPLC interface, tiny samples, and for Split flow applications - simple addition of a T connection allows 500 ul/min pumped to nebulizer, with 10 - 20 ul/min delivered to nebulizer. Produces very low oxides in ICP/MS.

Can NOT handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Straight chambers are better than cyclonics - sample drops are lost in cyclonics on the wall beside the injection point.

Cross-Reference(s):

None

   
Mira Mist CE Nebulizer
Mira Mist CE Nebulizer
AW Part # Description

MM CE

Designed for CE-ICP-MS interface. Medium pressure (80-90 psi), Very low sample flow (10 ul/min or less), enhanced parallel path design. Can operate on 0.01 ml/min to 2.5 ml/min. With Alcohol solutions can operate down to .001 ml/min. Excellent mist, can handle high level of particulates in sample.

Fits regular chambers as a direct replacement for glass concentric nebulizers. Designed for CE-ICP-MS analysis. Allows CE capillary to extend to tip of nebulizer for zero suction, zero back pressure CE interfacing with ICP / MS. Works best with mini chamber.

Cross-Reference(s):

None

   
T2002 Nebulizer
T2002 Nebulizer
AW Part # Description

T2002

The original standard Burgener nebulizer. Works well on most instruments. Fits most chambers. Best results are with Cyclonic Chambers. The T2002 was scheduled to be discontinued in Jan, 2010, but is still being manufactured to meet the continuing demand.

For most applications, the T2100 is a better nebulizer since it handles larger particles, lasts longer, and provides virtually the same intensities and stability.

Cross-Reference(s):

None

9 Item(s) Show per page
View as: Grid  List  Sort by Set Descending Direction
  1. Burgener Ari Mist HP Nebulizer

    Burgener Ari Mist HP Nebulizer
    $1,100.00

    AW Part Number: AM HP 5500

  2. Burgener Ari Mist Nebulizer

    Burgener Ari Mist Nebulizer
    $950.00

    AW Part Number: AM5000
    OEM Part Number: N0777032 (Perkin-Elmer), 4600495 (Thermo)

  3. Burgener Enya Mist Nebulizer

    Burgener Enya Mist Nebulizer
    $1,100.00

    AW Part Number: EM 6000

  1. Burgener Mira Mist CE Nebulizer

    Burgener Mira Mist CE Nebulizer
    $3,500.00

    AW Part Number: MM CE

  2. Burgener PFA 250 Nebulizer

    Burgener PFA 250 Nebulizer
    $1,100.00

    AW Part Number: PFA 250

  3. Burgener PEEK Mira Mist Nebulizer

    Burgener PEEK Mira Mist Nebulizer
    $850.00

    AW Part Number: PMM4000
    OEM Part Number: G3161-80000 (Agilent ICP-MS) | CP914506 (Agilent ICP-OES) | N0775330 (Perkin-Elmer) | 842312051471 (Thermo iCAP) | 4600356 (Thermo ICP-MS) | 47.929.024 (HORIBA JY)

  1. Burgener T2002 Nebulizer

    Burgener T2002 Nebulizer
    $950.00

    AW Part Number: T2002

  2. Burgener T2100 Nebulizer

    Burgener T2100 Nebulizer
    $850.00

    AW Part Number: T2100
    OEM Part Number: N0777033 (Perkin-Elmer) | 136388-00 (Thermo)

  3. Burgener Teflon Mira Mist Nebulizer

    Burgener Teflon Mira Mist Nebulizer
    $950.00

    AW Part Number: TMM3500
    OEM Part Number: G3161-80001 (Agilent ICP-MS) | CP913246 (Agilent ICP-OES) | N0777031 (Perkin-Elmer) | 4600356 (Thermo)

9 Item(s) Show per page
View as: Grid  List  Sort by Set Descending Direction