- Contact Us
- 1-888-948-9378
When cleaning cones which have a screw thread, it is important that the thread is not contacted by any corrosive solution. If the thread gets corroded, the cone may not seal correctly, or it may bond to the base and be difficult to remove. With Pt cones, the thread is likely to wear out before the Pt insert.
It is also important to keep the thread in good condition to prevent the possibility of cross-threading and potential damage to the instrument housing. The ConeGuard simply screws onto the threaded part of the cone and O-ring seals prevent any solution from meeting the thread, protecting it from corrosion during the cleaning process.
ConeGuard Thread Protector, Agilent 4500/7500 Sampler Cone
Learn MorePart Number: 70-803-1000
Cross Reference(s): 70-803-1000
Part Number: 70-803-1002
Cross Reference(s): 70-803-1002
Part Number: 70-803-1004
Cross Reference(s): 70-803-1004
ConeGuard Thread Protector, Agilent 7700x/7800/8800/8900 Skimmer
Learn MorePart Number: 70-803-1008
Cross Reference(s): 70-803-1008
Part Number: 70-803-1022
Cross Reference(s): N8121086
Part Number: 70-803-1024
Cross Reference(s): N8145319
Part Number: 70-803-1026
Cross Reference(s): N8145320