Category Navigation:

You're currently on:

Browse By

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

 

KDS Legacy Syringe Pumps

KDS Legacy Syringe Pumps

KD Scientific Syringe Pumps

KD Scientific’s selection of OEM syringe pumps for industrial and life science applications range from inexpensive single syringe infusion pumps to multi-syringe infusion/withdrawal pumps which feature independent rate and volume settings for both infusion and withdraw, plus five different mode selections. All KD Scientific syringe pumps have a menu and alphanumeric display to quickly prompt you through set up.

All KD pumps feature preset rate and volume control plus automatic shut-off. Dispense volume is tracked and displayed continuously. When the preset volume has been dispensed, the pump shuts off automatically. Flow rate is continuously variable across the flow rate range.

Each KD Scientific pump employs a sophisticated micro-stepping motor drive to virtually eliminate pulsing. Built-in TTL and RS232C interfaces permit easy external control on many pumps.

KD Scientific syringe pumps are ideal for delivering accurate and precise amounts of fluids for a multitude of syringe pump applications, including infusing a calibrant into a mass spectrometer or reaction chamber, long term drug infusions to animals and general infusion applications.

 

INFUSION PUMPS

KDS syringe pumps are known for their outstanding reliability and performance. The KDS 100 series syringe pumps give you the most cost effective solution for infusing fluids. Alternatively, the KDS 200 series gives you the advance features with RS232 and TTL interfaces. All the KDS 200 series pumps can be daisy chained together to create a syringe pump network.

AW Part Number

KDS Pump Model

Description

780100

KDS 100

Single-Syringe Infusion Pump

780100Y

KDS 100Y

Single-Syringe Infusion Pump w/ Remote Operation

780100ZZ

KDS 100L

Single-Syringe Infusion Pump w/ LED Indication

780101

KDS 101

Two-Syringe Nanoliter Pump

780200

KDS 200

Two-Syringe Infusion Pump (High-Flow)

780202

KDS 200P

Two-Syringe Infusion Pump (High-Flow), Programmable

780220

KDS 220

Multi-Syringe Infusion Pump

780222

KDS 220P

Multi-Syringe Infusion Pump, Programmable

780250

KDS 250

Four-Syringe Nanoliter Infusion Pump

780252

KDS 250P

Four-Syringe Nanoliter Infusion Pump, Programmable

 

 

INFUSION WITHDRAWAL PUMPS

Syringe pumps with infuse and withdraw capabilities provide maximum flexibility for varied applications. This feature permits applications such as automatic withdrawal of samples and unattended filling of syringes, fluid level adjustments with continual infusing and withdrawing and the infusing of drug or nutritional materials and diffusion into chemical reactors.

AW Part Number

KDS Pump Model

Description

780210

KDS 210

Two-Syringe Infusion/Withdrawal Pump

780212

KDS 210P

Two-Syringe Infusion/Withdrawal Pump, Programmable

780230

KDS 230

Multi-Syringe Infusion/Withdrawal Pump

780232

KDS 230P

Multi-Syringe Infusion/Withdrawal Pump, Programmable

780310

KDS 310 Plus

Nanoliter Syringe Pump

 

PUSH-PULL AND CONTINUOUS FLOW PUMPS

Continuous flow can be achieved using a syringe pump simply by adding a 3 way valve. A push/pull style syringe pump can continuously cycle allowing two syringes to dispense fluid while the opposite two syringes are refilling. When the end of one cycle is reached, the pump reverses and the delivery continues. This method will allow a pump to deliver continuously 24/7.

AW Part Number

KDS Pump Model

Description

780120

KDS 120

Two-Syringe Nanoliter Push-Pull Pump

780260

KDS 260

Four-Syringe Push-Pull Pump

780270

KDS 270

Continuous Cycle Syringe Pump

 

 

SPECIALTY PUMPS

KD Scientific has a number of specialty products for liquid handling, mixing and detection. Each product is suited to a specific application. The KDS 330 Emulsifier Pump is a push pull pump that is designed to emulsify viscous fluids/suspensions by forcing them back and forth through a micro-emulsifying needle and the Spill Sensor is designed to detect spills around sensitive equipment and to take preventative action if possible. The new KDS 410 is a high pressure syringe pump which more than doubles the linear force available on the KDS 200 series. This extra force makes the pump ideal for delivery of fluid to reactors in chemical applications or for working with viscous fluids.

AW Part Number

KDS Pump Model

Description

780350

KDS Pico

Pico Liter Syringe Pump

780330

KDS 330

Emulsifier Pump

780410

KDS 410

High-Pressure Syringe Pump

780412

KDS 410P

High-Pressure Syringe Pump, Programmable

780388

KDS Gemini 88

Dual Rate Pump

 

PROGRAMMABLE PUMPS

All 200 series syringe pumps are available as programmable pumps, as well as the KDS 410 syringe pump. They permit multistep dispenses without the need for computer control.

From the pump keypad, a custom program can be entered which will control the syringe pump from seconds to days; permit the flow rate to be changed for discrete time periods; repeat dispenses control output TTL signals to coordinate with other laboratory instruments (or valves); or respond to inputs from other devices such as switches or relays and to perform loops where dispense sequences are repeated.

The program is divided into time periods called STEPS, each of which can be up to 12 hours long. Each step is automatically numbered and, to simplify programming, a menu prompts the user to select the options available in each step.

The flow rate can be ramped up or down or kept constant for a defined time period for a volume dispense. The initial and final flow rate for each period is entered and the pump automatically makes rate changes over the time period. No need to enter increments for a ramp up or down, the syringe pump automatically ramps the rate linearly.

The syringe pump can be paused and then restarted, either by a time delay or by a TTL input. Both TTL inputs and outputs can be controlled by the pump. The syringe pump can therefore, respond to switch closures or send out signals to actuate a valve, or other relays, switches etc.

Two separate loops can be programmed so that steps can be repeated. The number of repeat operations is controlled by the "loop count". For example, this is helpful when a volume dispense is required repeatedly, triggered by a switch. The two loops can be "nested" so that the program can run for days and complex dispenses can be repeated many times.

Each step offers these options:

  1. Time duration from one second up to 12 hours
  2. Travel direction – Infuse or withdraw (where available)
  3. Beginning flow rate (µl/hr to ml/min range)
  4. End flow rate (µl/hr to ml/min range)
  5. Pause – Waits for an external trigger to start
  6. Status of output TTL pins
  7. Loop option – Loops back to any previous step and repeats the intermediate steps. Two separate loops are available.
  8. Set the count in the loop cycle. Steps may be repeated up to 100 times.

AW Part Number

KDS Pump Model

Description

788110

KDS Legato 110

Infuse/Withdraw Programmable Syringe Pump

788111

KDS Legato 111

Infuse/Withdraw Programmable Dual Syringe Pump

788180

KDS Legato 180

Infuse/Withdraw Programmable Dual Syringe Pump (Low Flow)

788212

KDS Legato 210P

Infuse/Withdrawal Dual-Syringe Pump, Programmable

788272

KDS Legato 270P

Push/Pull Syringe Pump, Programmable

780202

KDS 200P

Two-Syringe Infusion Pump, Programmable

780222

KDS 220P

Multi-Syringe Infusion Pump, Programmable

780252

KDS 250P

Four-Syringe Nanoliter Infusion Pump, Programmable

780212

KDS 210P

Two-Syringe Infusion/Withdrawal Pump, Programmable

780232

KDS 230P

Multi-Syringe Infusion/Withdrawal Pump, Programmable

780412

KDS 410P

High-Pressure Syringe Pump, Programmable

 

Please contact us at 1-800-305-0004 to learn more about the KD Scientific line of economical liquid handling products for automated and affordable delivery of fluids and gas for your laboratory.

Learn more about KD Scientific.

Items 1 to 9 of 23 total
Items 1 to 9 of 23 total Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction
  1. KDS100 Single-Syringe Infusion Pump

    KDS100 Single-Syringe Infusion Pump
    $1,373.00

    AW Part Number: 780100
    OEM Part Number: KDS100, 52459-000

  2. KDS100Y Single-Syringe Infusion Pump with Remote Activation

    KDS100Y Single-Syringe Infusion Pump with Remote Activation
    $1,734.00

    AW Part Number: 780100Y
    OEM Part Number: KDS100Y

  3. KDS100L Single-Syringe Infusion Pump with LED Indication

    KDS100L Single-Syringe Infusion Pump with LED Indication
    $1,789.00

    AW Part Number: 780100ZZ
    OEM Part Number: KDS100L

  1. KDS101 Dual-Syringe Infusion Pump

    KDS101 Dual-Syringe Infusion Pump
    $1,913.00

    AW Part Number: 780101
    OEM Part Number: KDS101

  2. KDS120 Two-Syringe Push/Pull Pump

    KDS120 Two-Syringe Push/Pull Pump
    $2,743.00

    AW Part Number: 780120
    OEM Part Number: KDS120

  3. KDS200 Two-Syringe Infusion Pump

    KDS200 Two-Syringe Infusion Pump
    $2,669.00

    AW Part Number: 780200
    OEM Part Number: KDS200

  1. KDS200P Dual-Syringe Infusion/Withdrawal Pump (HF), Programmable

    KDS200P Dual-Syringe Infusion/Withdrawal Pump (HF), Programmable
    $3,728.00

    AW Part Number: 780202
    OEM Part Number: KDS200P

  2. KDS210 Dual-Syringe Infusion/Withdrawal Pump

    KDS210 Dual-Syringe Infusion/Withdrawal Pump
    $3,357.00

    AW Part Number: 780210
    OEM Part Number: KDS210

  3. KDS210P Dual-Syringe Infusion/Withdrawal Pump, Programmable

    KDS210P Dual-Syringe Infusion/Withdrawal Pump, Programmable
    $4,273.00

    AW Part Number: 780212
    OEM Part Number: KDS210P

Items 1 to 9 of 23 total
Items 1 to 9 of 23 total Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction