PolyPro-ST Nebulizer

The PolyPro-ST Nebulizer is a low cost HF resistant alternative to the PFA nebulizers. The PolyPro has lower chemical resistance than the PFA nebulizers but have the same high efficiency aerosol generation. A robust nebulizer that can self aspirate with an exchangeable external sample uptake capillary or used with a peristaltic pump.

Exchangeable uptake capillaries allow one nebulizer to be used at different self-aspiration rates from 20µL/min to 700µL/min.
Polypropylene and Teflon® construction.
Chemically resistant to most samples including HF.
Can be pumped from 0.1mL/min to 5.0mL/min.
Produces a fine aerosol for high transport efficiency and high sensitivity.
Longer lifetime than glass or quartz nebulizers.
Capillaries available:
0.15 mm i.d. 20µL/min
0.20 mm i.d. 50µL/min
0.25 mm i.d. 100µL/min – recommended for peristaltic pumping 0.1 to 1.0mL/min
0.30 mm i.d. 200µL/min
0.50 mm i.d. 400µL/min—recommended for peristaltic pumping 0.5 to 3.0mL/min
0.80 mm i.d. 700µL/min.—recommended for peristaltic pumping up to 5.0mL/min
1.00 mm i.d. 1mL/min.

Flanged autosampler probes for self aspiration at a variety of flow rates with PolyPro-ST nebulizers are also available, as well as complete kits for peristaltic pumping.

Autosamplers supported:

ESI SC-Autosamplers
Agilent Integrated Autosampler I-AS
Cetac ASX-100
Cetac ASX-500 series
Perkin Elmer AS-9X series
Gilson
Spectro AS-400
Varian SMS